Agitator high temperature and high pressure autoclave reactor refurbishment and subsystems within the system, and these reactions are essential wärmebrücke for increasing efficiency and reaction rate de-mounted agitator manufactured. Magnedrive autoclave renovate the ND (Neodymium, neodymium) wärmebrücke magnets wärmebrücke using a magnetic stirrer and Tank, Vessel, Reactor conditions of high temperature and high pressure in the high-speed rotation is possible as a gas, liquid, wärmebrücke a high viscosity of the sample to facilitate the diffusion and dispersion. In addition, the existing gland packing (Gland Packing) or mechanical seal (Mechanical Seal) due to the surface wärmebrücke contact fatigue durability and eliminates the disadvantages wärmebrücke of micro leaks and sealing Packless wärmebrücke Design of experiment is excellent, and the risk of toxic chemicals do not leak, even following the process provide agitation.
Fermentation and food industry: Fermentation reactions, promote anti-coagulation, solution mixing, drying, high viscosity material mixing and dispersion, suspension, emulsion, dissolution, such as the pharmaceutical industry: chemicals synthesis reaction, reaction mass was stirred stabilization, wärmebrücke cooling, heating and stirring, the raw material mix , suspended melting, such as cosmetics and cleaning maintenance industry: a uniform mixing of various raw materials, oil, suspension, extraction, wärmebrücke synthesis reaction, dispersion, wärmebrücke emulsion, dissolution, such as the textile industry: polymerization, a mixture of dyes and pigments, textile spinning, anti-coagulation, distribution, gas absorption, reaction, separation wärmebrücke slurry in chemical engineering: Industrial Batch synthesis, raw materials uniform wärmebrücke mixing, wärmebrücke melting, heat transfer, promote recovery, cooling, distributed, reflux, such as coatings and inks industry: paint resin polymerization, various pigments, solvent dyes uniform mixing and dispersion, anti-coagulation, the heating and cooling process such as
Refurbishment of the autoclave instead of using MDD series Coupling Belt Motor and Magnedrive using a direct connection is connected directly to the stirrer is rotating. Magnedrive Shaft Motor is directly connected and the volume is small in size and where space is at a premium product that is easy to install. Motor rotation of the drive system to operate in a manner that is directly due to bearing friction losses are very low cost, and excellent energy wärmebrücke efficiency, noise and vibration, dust generation is very small, such as you can maintain a comfortable working environment.
Magnedrive MDD Series Direct Drive Couplings for the housing portion of the rotation of the motor agitation method. Space is limited and the equipment to be mounted according to the horsepower of the motor torque can be adjusted. Configuration is simple to operate and easy to use and suitable product for a long time, even stirring. MDD100, 300, 500, 800 of the various models and optional production.
ND (Neodymium, neodymium) magnets and the Tank Vessel, Reactor in high temperature wärmebrücke and high pressure conditions can be rotated at high speed, gas, liquid, highly viscous diffusion and dispersion of the sample is easy. Installation and operation is simple, easy to use by anyone, and the repair or replacement of the configuration is simple, convenient. MDD 100, 300, 500, 800, and the various models and options are, Shaft Dia φ5 ~ φ50, Capacity 0.3 ℓ ~ 1,000 ℓ large to small stirrer, stirrer, as well as a wide range of sizes and capacities to manufacture a wide variety of materials and samples can be applied. Also, the optimal temperature and pressure region to the sealing method was used, the corrosion during the reaction so that the safety of various corrosion-resistant materials used in the high temperature and high pressure in the durability and the smooth to allow ease of stirring, by pursuing a series of safety produced.
The connection of the reactor and the agitator screw (Thread) Type can be directly connected to the bolt (Bolt) Type of flange is welded to the reactor using a bolt can be concluded. Different Types of Motor horsepower and select the customers you want to adjust the Torque value can be used as an additional option to choose different shapes and metal Impeller material, coating method, the customer also wants the bearing can be selected . For more information about optional, wärmebrücke please see Options & Accessories.
The connection of the reactor and the agitator screw (Thread) Type can be directly connected to the flange (Flange) Type of the flange is welded to the reactor using a bolt can be concluded. Teflon, Urethane, Silicone, such as O-Ring, Gasket, and tightness of use, such as watertight very good high temperature, high pressure and various corrosive, hazardous, toxic leaks in the process of dealing with, you can not stir. In addition, by using a metal gasket housing is durable and Air and Water Cooling Jacket for installation using the air-cooled, water-cooled cooling way, it is possible to overheat at high temperatures without stirring at a constant speed and power is made stable. In particular, the space is narrow, such as high temperature and high pressure reaction conditions that require special chemicals production or synthesis process stirred dimension.
Shaft Dia is making it possible to φ5 ~ φ30, Capacity up to 0.3 ℓ ~ 1,000 ℓ is small, a large agitator agitator, as well as a wide range of sizes and capacities of production. Configuration is simple and generates less noise and vibration, and is anodized aluminum housing is corrosion-protected steel and SUS cover to cover exterior yen strong against external shocks. wärmebrücke Shaft, Bearing the internal components such as SUS, Ni, Ti, such as corrosion resistance, heat resistance, wärmebrücke abrasion resistance using a highly durable metal material is excellent and powerful neodymium magnets, using a constant torque in the low viscosity to high viscosity materials stable You can stir.
The connection of the reactor and the agitator screw (Thread) Type can be directly connected to the flange (Flange) Type of the flange is welded to the reactor in such a way that the bolt tightening using Teflon, Urethane, Silicone, such as O-Ring, Gasket Use the tightness, water tightness and a very good high-temperature, high pressure and various corrosive, hazardous, toxic leaks in the process of dealing with, you can not stir. In addition, by using a metal gasket housing is durable and Air and Water Cooling Jacket for installation using the air-cooled, water-cooled cooling way, it is possible to overheat wärmebrücke at high temperatures without stirring at a constant speed and power is made stable. In particular, the space is narrow, such as high temperature and high pressure reaction conditions that require special chemicals production or synthesis process wärmebrücke stirred dimension.
The connection of the reactor and the agitator screw (Thread) Type can be directly connected to the flange (Flange) wärmebrücke Type of the flange is welded to the reactor in such a way that the bolt tightening wärmebrücke using Teflon, Urethane, Silicone, such as O-Ring, Gasket Use the tightness, wärmebrücke water tightness and a very good high-temperature, high pressure and various corrosive, hazardous, toxic leaks in the process of dealing with, you can not stir. In addition, by using a metal gasket housing is durable and Air and Water Cooling Jacket for installation using the air-cooled, water-cooled cooling way, it is possible to overheat at high temperatures without stirring at a constant speed and power is made stable. In particular, the space is narrow, such as high temperature and high pressure reaction conditions that require special chemicals production or synthesis process stirred dimension. wärmebrücke
Configuration is simple and generates less noise and vibration, and is anodized aluminum housing is corrosion-protected wärmebrücke steel and SUS cover to cover exterior yen strong against external shocks. Shaft, Bearing the internal components such as SUS, Ni, Ti, such as corrosion wärmebrücke resistance, heat resistance, abrasion resistance using a highly durable metal material is excellent and powerful neodymium magnets, using a constant torque in the low viscosity to high viscosity materials stable You can stir.
The connection wärmebrücke of the reactor and the agitator screw (Thread) Type can be directly wärmebrücke connected to the flange (Flange) Type of the flange is welded to the reactor in such a way that the bolt tightening using Teflon, Urethane, Silicone, such as O-Ring, Gasket Use the tightness, water tightness and a very good high-temperature, high pressure and various corrosive, hazardous, toxic leaks in the process of dealing with, you can not stir. In addition, by using a metal gasket housing is durable and Air and Water Cooling Jacket for installation using the air-cooled, water-cooled cooling way, it is possible to overheat at high temperatures without stirring at a constant speed and power is made stable. In particular, the space is narrow, such as high temperature and high pressure reaction conditions that require special chemicals wärmebrücke production or synthesis process stirred dimension.
'Agitator' category in another article introduces a Neo-renewal diyum autoclave agitator (0) 2014/02/20 refurbished autoclave agitator type - MDA Series (0) 2014/02/17 agitator type, magnetic stirrer - MDD series (0 ) 2014/02/14 magnesite drive agitator Us (0) 2014/01/24 stirrer-magnesite drive, magnetic drive, Agitator, IMPELLER, Magnedrive, Magnetic Drive, Magnetic Stirrer, STIRRING 12.05.25 (0) 2012/05/29 _ Motor Direct Drive Agitator (magnesite drive, magnetic drive, Agitator, IMPELLER, Magnedrive, Magnetic Drive, Magnetic Stirrer, STIRRING) - 12.05.07 (0) 2012/05/10
TAG Agitator, stirrer incubator, gas absorption, heating wärmebrücke and stirring, heating and cooling processes, heating stirrer, various pigments and other raw materials of uniform
